Whether for your own security, for roadworthiness testing or to prevent a fine, ensuring your turn signal bulbs are constantly working is fundamental. In actual fact, bulbs are wearing parts that will surely burn out over time and consequently need to be replaced. You’re almost certainly on this website because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Suzuki Sx4, we’ve written and published this post to teach you do it alone without having to go to your auto technician. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Suzuki Sx4 and in a second part, how to change the rear turn signal bulb on your Suzuki Sx4.
How to be sure if the rear turn signal bulb on your Suzuki Sx4 is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the opportunity to check all the security features of your Suzuki Sx4. In actual fact, you are quite often on the go and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore crucial to take some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Suzuki Sx4, but you didn’t notice it. Here are the two basic techniques to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Suzuki Sx4, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
- By paying attention to the sound of your turn signals. Indeed, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Suzuki Sx4, you will notice that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Suzuki Sx4 or your position lights on Suzuki Sx4, don’t hesitate to browse our content articles to help you to do this replacing.
Changing the rear turn signal bulb on my Suzuki Sx4
Now let’s go to the most instersting part of this content page, how to change the rear turn signal bulb on Suzuki Sx4? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Suzuki Sx4, see our specific guideline. Nevertheless, here are the detailed description to carry out in order to carry out this work properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Suzuki Sx4. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way
.
Whenever you have any further questions about the Suzuki Sx4, do not hesitate to consult our Suzuki Sx4 category.
