Whether for your own safety, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are always functioning is critical. In truth, bulbs are wearing devices that will predictably burn out over time and consequently need to be replaced. You’re most certainly in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Suzuki Across, we’ve made this post to teach you do it all on your own without having to go to your repair shop. In a first step, we will look at examining a burnt-out rear turn signal bulb on your Suzuki Across and in a second part, how to replace the rear turn signal bulb on your Suzuki Across.
How to be sure if the rear turn signal bulb on your Suzuki Across is burnt-out or needs to be replaced?
When you drive your car you don’t always have the occasion to examine all the safety features of your Suzuki Across. In truth, you are quite often in a hurry and are likely to get into your car, make your trip and put it down right away without taking the time to do an occasional check-up. It is as a result necessary to take some time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Suzuki Across, but you didn’t detect it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Suzuki Across, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Suzuki Across, you will detect that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Suzuki Across or your position lights on Suzuki Across, don’t be reluctant to browse our web content to help you to do this replacing.
Changing the rear turn signal bulb on my Suzuki Across
Now let’s go to the most important part of this content, how to replace the rear turn signal bulb on Suzuki Across? Please note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Suzuki Across, see our specific content page. Nevertheless, here are the full description to adhere to in order to execute this act accurately:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Suzuki Across. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning effectively
.
If you have any further questions about the Suzuki Across, do not hesitate to consult our Suzuki Across category.
