Whether for your personal safety, for roadworthiness evaluation or to avoid a fine, ensuring your turn signal bulbs are always working is fundamental. Indeed, bulbs are wearing auto parts that will inevitably burn out with time and as a result need to be replaced. You’re certainly here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Subaru Outback, we’ve written this post to help you do it alone without having to go to your auto technician. To begin , we will check out examining a burnt-out rear turn signal bulb on your Subaru Outback and in a second step, how to change the rear turn signal bulb on your Subaru Outback.


How do you know if the rear turn signal bulb on your Subaru Outback is burnt-out or needs to be changed?

When you drive your vehicle you don’t always have the occasion to verify all the safety features of your Subaru Outback. Indeed, you are more often than not on the go and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result important to spend some time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Subaru Outback, but you didn’t identify it. Here are the two simple methods to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your Subaru Outback, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
  • By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Subaru Outback, you will notice that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to change, like the one of your low beam Subaru Outback or your position lights on Subaru Outback, don’t hesitate to browse our articles to help you to achieve this replacing.

Replacing the rear turn signal bulb on my Subaru Outback

Now let’s go to the most important step of this article, how to change the rear turn signal bulb on Subaru Outback? Take note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Subaru Outback, see our specific article content. Nevertheless, here are the detailed steps to carry out in order to accomplish this process accurately:

  • To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Subaru Outback. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating correctly

To find more tips on the Subaru Outback, take a look at the Subaru Outback category.