No matter if it’s for your personal safety, for roadworthiness evaluation or to avoid a fine, making sure your turn signal bulbs are all the time functioning is very important. In truth, bulbs are wearing devices that will obviously burn out in the long run and therefore need to be swapped out. You’re certainly here because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Skoda Kodiaq, we’ve made this article to teach you do it alone without having to go to your mechanic. To begin , we will examine examining a burnt-out rear turn signal bulb on your Skoda Kodiaq and in a second part, how to replace the rear turn signal bulb on your Skoda Kodiaq.
How do you know if the rear turn signal bulb on your Skoda Kodiaq is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the opportunity to examine all the safety features of your Skoda Kodiaq. In truth, you are quite often in a hurry and are likely to get into your vehicle, make your journey and put it down straight away without taking the time to do an occasional check-up. It is due to this fact fundamental to take a little time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Skoda Kodiaq, but you didn’t become aware of it. Here are the two simple ways to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Skoda Kodiaq, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are operational.
- By paying attention to the sound of your turn signals. Indeed, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Skoda Kodiaq, you will notice that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Skoda Kodiaq or your position lights on Skoda Kodiaq, don’t be reluctant to consult our content articles to help you to do this replacement.
Changing the rear turn signal bulb on my Skoda Kodiaq
Now let’s go to the most important part of this content, how to replace the rear turn signal bulb on Skoda Kodiaq? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Skoda Kodiaq, see our specific guideline. Nevertheless, here are the detailed steps to carry out in order to conduct this work accurately:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Skoda Kodiaq. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way
.
If you have any additional questions about the Skoda Kodiaq, do not hesitate to consult our Skoda Kodiaq category.
