No matter if it’s for your own safety, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are always working is necessary. In actual fact, bulbs are wearing auto parts that will surely burn out in the long run and consequently need to be swapped out. You’re certainly on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Skoda Kamiq, we’ve put into writing this post to teach you do it by yourself without having to go to your mechanic. In a first step, we will look at inspecting a burnt-out rear turn signal bulb on your Skoda Kamiq and in a second part, how to replace the rear turn signal bulb on your Skoda Kamiq.
How to be sure if the rear turn signal bulb on your Skoda Kamiq is burnt-out or needs to be replaced?
When you drive your car you don’t always have the opportunity to verify all the safety features of your Skoda Kamiq. In actual fact, you are often times in a rush and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact important to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Skoda Kamiq, but you didn’t become aware of it. Here are the two ordinary techniques to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Skoda Kamiq, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In truth, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Skoda Kamiq, you will recognise that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Skoda Kamiq or your position lights on Skoda Kamiq, don’t hesitate to read our publications to help you to realize this replacing.
Replacing the rear turn signal bulb on my Skoda Kamiq
Now let’s go to the most important part of this article content, how to replace the rear turn signal bulb on Skoda Kamiq? You should be aware that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Skoda Kamiq, see our dedicated content page. However, here are the detailed description to carry out in order to conduct this process correctly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Skoda Kamiq. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
Whenever you have any further questions about the Skoda Kamiq, do not hesitate to consult our Skoda Kamiq category.
