No matter if it’s for your own security, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are always functioning is very important. In fact, bulbs are wearing parts that will predictably burn out with time and as a result need to be replaced. You’re likely here because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Renault Twingo 2, we’ve created this content to enable you do it alone without having to go to your auto technician. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Renault Twingo 2 and in a second step, how to replace the rear turn signal bulb on your Renault Twingo 2.
How to be sure if the rear turn signal bulb on your Renault Twingo 2 is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to examine all the security features of your Renault Twingo 2. In fact, you are often on the go and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result crucial to take the time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Renault Twingo 2, but you didn’t detect it. Here are the two basic solutions to examine if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Renault Twingo 2, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By paying attention to the sound of your turn signals. In truth, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Renault Twingo 2, you will detect that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to replace, like the one of your low beam Renault Twingo 2 or your position lights on Renault Twingo 2, don’t be reluctant to have a look at our articles to help you to complete this replacing.
Changing the rear turn signal bulb on my Renault Twingo 2
Now let’s go to the most important step of this guideline, how to replace the rear turn signal bulb on Renault Twingo 2? Please note that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Renault Twingo 2, see our specific article content. However, here are the detailed steps to carry out to be able to perform this act correctly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Renault Twingo 2. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way
.
To find more tips on the Renault Twingo 2, take a look at the Renault Twingo 2 category.
