No matter if it’s for your personal security, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are always functioning is imperative. Obviously, bulbs are wearing parts that will inevitably burn out as time passes and as a result need to be swapped out. You’re likely here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Renault Clio 3, we’ve written this post to help you do it without any help without having to go to your motor mechanic. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Renault Clio 3 and in a second step, how to change the rear turn signal bulb on your Renault Clio 3.
How to be sure if the rear turn signal bulb on your Renault Clio 3 is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to check all the security features of your Renault Clio 3. Obviously, you are more often than not in a hurry and tend to get into your car, make your trip and put it down right away without taking the time to do an occasional check-up. It is due to this fact necessary to take some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Renault Clio 3, but you didn’t perceive it. Here are the two simple solutions to check if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Renault Clio 3, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Renault Clio 3, you will detect that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Renault Clio 3 or your position lights on Renault Clio 3, don’t be reluctant to browse our publications to help you to achieve this substitution.
Changing the rear turn signal bulb on my Renault Clio 3
Now let’s go to the most important step of this content page, how to change the rear turn signal bulb on Renault Clio 3? Take note that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Renault Clio 3, see our specific article content. On the other hand, here are the full description to stick to to be able to perform this work correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Renault Clio 3. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating effectively
.
If you want more guides on the Renault Clio 3, go to our Renault Clio 3 category.
