Whether for your personal security, for roadworthiness evaluation or to prevent a fine, ensuring your turn signal bulbs are constantly working is extremely important. In reality, bulbs are wearing parts that will predictably burn out over time and therefore need to be swapped out. You’re likely here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Peugeot Partner Tepee, we’ve created this content to enable you do it all on your own without having to go to your repair shop. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Peugeot Partner Tepee and in a second part, how to change the rear turn signal bulb on your Peugeot Partner Tepee.

change-rear-turn-bulb-peugeot-partner-tepee

How to be sure if the rear turn signal bulb on your Peugeot Partner Tepee is burnt-out or needs to be changed?

When you drive your vehicle you don’t constantly have the occasion to examine all the security features of your Peugeot Partner Tepee. In reality, you are generally on the go and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact important to make the effort to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot Partner Tepee, but you didn’t become aware of it. Here are the two basic ways to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your Peugeot Partner Tepee, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are operational.
  • By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Peugeot Partner Tepee, you will detect that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to change, like the one of your low beam Peugeot Partner Tepee or your position lights on Peugeot Partner Tepee, don’t be reluctant to browse our content articles to help you to do this replacing.

Changing the rear turn signal bulb on my Peugeot Partner Tepee

Now let’s go to the most instersting part of this article, how to change the rear turn signal bulb on Peugeot Partner Tepee? Take note that this method is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot Partner Tepee, see our dedicated content. Nevertheless, here are the detailed description to carry out in order to do this process correctly:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Peugeot Partner Tepee. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way

If perhaps you have any additional questions about the Peugeot Partner Tepee, do not hesitate to consult our Peugeot Partner Tepee category.