No matter if it’s for your own security, for roadworthiness tests or to prevent a fine, ensuring that your turn signal bulbs are all the time functional is fundamental. Surely, bulbs are wearing auto parts that will inevitably burn out in the long run and consequently need to be replaced. You’re most certainly here because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Peugeot e-208, we’ve written and published this article to enable you do it by yourself without having to go to your repair shop. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Peugeot e-208 and in a second step, how to change the rear turn signal bulb on your Peugeot e-208.
How do you know if the rear turn signal bulb on your Peugeot e-208 is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the opportunity to check all the security features of your Peugeot e-208. Surely, you are quite often in a rush and are likely to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is due to this fact essential to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot e-208, but you didn’t identify it. Here are the two simple solutions to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Peugeot e-208, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Peugeot e-208, you will perceive that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Peugeot e-208 or your position lights on Peugeot e-208, don’t hesitate to have a look at our publications to help you to do this substitution.
Changing the rear turn signal bulb on my Peugeot e-208
Now let’s go to the most important step of this content page, how to change the rear turn signal bulb on Peugeot e-208? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot e-208, see our specific article. Nevertheless, here are the detailed description to carry out to be able to perform this process correctly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Peugeot e-208. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating in the right way
.
If you have any further questions about the Peugeot e-208, do not hesitate to consult our Peugeot e-208 category.
