No matter if it’s for your personal security, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are all the time functional is very important. In truth, bulbs are wearing auto parts that will predictably burn out with time and therefore need to be swapped out. You’re most probably here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Peugeot e-2008, we’ve written and published this post to teach you do it without any help without having to go to your repair shop. To begin , we will look at inspecting a burnt-out rear turn signal bulb on your Peugeot e-2008 and in a second part, how to change the rear turn signal bulb on your Peugeot e-2008.
How do you know if the rear turn signal bulb on your Peugeot e-2008 is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the occasion to verify all the security features of your Peugeot e-2008. In truth, you are quite often in a hurry and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact fundamental to take a little time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot e-2008, but you didn’t perceive it. Here are the two simple solutions to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Peugeot e-2008, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Peugeot e-2008, you will perceive that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Peugeot e-2008 or your position lights on Peugeot e-2008, don’t hesitate to browse our web content to help you to complete this substitution.
Changing the rear turn signal bulb on my Peugeot e-2008
Now let’s go to the most instersting part of this article content, how to change the rear turn signal bulb on Peugeot e-2008? Take note that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot e-2008, see our dedicated article. On the other hand, here are the full description to carry out in order to perform this act correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Peugeot e-2008. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning in the right way
.
To get more tips on the Peugeot e-2008, take a look at the Peugeot e-2008 category.
