Whether for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly functioning is critical. Obviously, bulbs are wearing parts that will predictably burn out in the long run and as a result need to be replaced. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Peugeot 807, we’ve created this article to teach you do it all on your own without having to go to your motor mechanic. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Peugeot 807 and in a second step, how to replace the rear turn signal bulb on your Peugeot 807.
How to be sure if the rear turn signal bulb on your Peugeot 807 is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the opportunity to verify all the safety features of your Peugeot 807. Obviously, you are quite often on the go and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore crucial to spend some time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 807, but you didn’t identify it. Here are the two simple methods to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Peugeot 807, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. Indeed, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Peugeot 807, you will recognise that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Peugeot 807 or your position lights on Peugeot 807, don’t hesitate to read our articles to help you to complete this replacing.
Changing the rear turn signal bulb on my Peugeot 807
Now let’s go to the most instersting step of this guideline, how to replace the rear turn signal bulb on Peugeot 807? Please be aware that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 807, see our dedicated article content. Nevertheless, here are the detailed steps to stick to to be able to complete this act properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Peugeot 807. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning effectively
.
If perhaps you have any additional questions about the Peugeot 807, do not hesitate to consult our Peugeot 807 category.
