Whether for your personal security, for roadworthiness testing or to prevent a fine, ensuring that your turn signal bulbs are always functional is extremely important. In actual fact, bulbs are wearing auto parts that will obviously burn out over time and as a result need to be swapped out. You’re almost certainly here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Peugeot 508, we’ve written this content to enable you do it all on your own without having to go to your motor mechanic. In a first step, we will have a look at the checking a burnt-out rear turn signal bulb on your Peugeot 508 and in a second part, how to change the rear turn signal bulb on your Peugeot 508.
How to find out if the rear turn signal bulb on your Peugeot 508 is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to verify all the security features of your Peugeot 508. In actual fact, you are often in a hurry and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result important to make the effort to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 508, but you didn’t detect it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Peugeot 508, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Peugeot 508, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Peugeot 508 or your position lights on Peugeot 508, don’t hesitate to have a look at our publications to help you to complete this replacement.
Replacing the rear turn signal bulb on my Peugeot 508
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Peugeot 508? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 508, see our specific article content. However, here are the detailed description to carry out in order to do this process accurately:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Peugeot 508. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning effectively
.
If you want more tutorials on the Peugeot 508, go to our Peugeot 508 category.
