Whether for your own security, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are constantly working is very important. In truth, bulbs are wearing devices that will surely burn out after a while and consequently need to be swapped out. You’re most likely here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Peugeot 306, we’ve written and published this article to teach you do it without any help without having to go to your mechanic. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Peugeot 306 and in a second part, how to replace the rear turn signal bulb on your Peugeot 306.

change-rear-turn-bulb-peugeot-306

How to be sure if the rear turn signal bulb on your Peugeot 306 is burnt-out or needs to be replaced?

When you drive your car you don’t constantly have the possibility to check all the security features of your Peugeot 306. In truth, you are quite often in a hurry and are likely to get into your car, make your journey and put it down straight away without taking the time to do an occasional check-up. It is therefore necessary to make the effort to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 306, but you didn’t detect it. Here are the two basic solutions to check if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Peugeot 306, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your turn signals. In truth, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Peugeot 306, you will recognise that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to replace, like the one of your low beam Peugeot 306 or your position lights on Peugeot 306, don’t be reluctant to have a look at our content articles to help you to achieve this replacing.

Replacing the rear turn signal bulb on my Peugeot 306

Now let’s go to the most instersting part of this content page, how to replace the rear turn signal bulb on Peugeot 306? Please be aware that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 306, see our dedicated guideline. However, here are the detailed description to stick to in order to execute this act properly:

  • To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Peugeot 306. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way

To get more tips on the Peugeot 306, take a look at the Peugeot 306 category.