No matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are all the time working is fundamental. In actual fact, bulbs are wearing devices that will inevitably burn out over time and therefore need to be swapped out. You’re likely in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Peugeot 108, we’ve written and published this content to enable you do it without any help without having to go to your technician. To begin , we will take a look at examining a burnt-out rear turn signal bulb on your Peugeot 108 and in a second part, how to replace the rear turn signal bulb on your Peugeot 108.

change-rear-turn-bulb-peugeot-108

How to be sure if the rear turn signal bulb on your Peugeot 108 is burnt-out or needs to be replaced?

When you drive your vehicle you don’t all the time have the possibility to examine all the safety features of your Peugeot 108. In actual fact, you are generally on the go and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact fundamental to make the effort to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 108, but you didn’t notice it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your Peugeot 108, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
  • By paying attention to the sound of your turn signals. In actual fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Peugeot 108, you will recognize that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.

You may have another bulb to replace, like the one of your low beam Peugeot 108 or your position lights on Peugeot 108, don’t hesitate to consult our articles to help you to complete this replacement.

Replacing the rear turn signal bulb on my Peugeot 108

Now let’s go to the most important part of this guideline, how to replace the rear turn signal bulb on Peugeot 108? You should be aware that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 108, see our dedicated article. On the other hand, here are the full description to carry out to be able to do this work properly:

  • To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Peugeot 108. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working in the right way

If you want more guides on the Peugeot 108, go to our Peugeot 108 category.