No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is necessary. In truth, bulbs are wearing parts that will inevitably burn out as time passes and as a result need to be replaced. You’re most probably in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Peugeot 106, we’ve posted this post to enable you do it all on your own without having to go to your motor mechanic. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Peugeot 106 and in a second part, how to replace the rear turn signal bulb on your Peugeot 106.

change-rear-turn-bulb-peugeot-106

How to find out if the rear turn signal bulb on your Peugeot 106 is burnt-out or needs to be replaced?

When you drive your vehicle you don’t always have the opportunity to examine all the security features of your Peugeot 106. In truth, you are more often than not on the go and tend to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result fundamental to make the effort to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 106, but you didn’t identify it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your Peugeot 106, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
  • By paying attention to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Peugeot 106, you will recognize that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Peugeot 106 or your position lights on Peugeot 106, don’t hesitate to have a look at our publications to help you to achieve this replacing.

Changing the rear turn signal bulb on my Peugeot 106

Now let’s go to the most important part of this guideline, how to replace the rear turn signal bulb on Peugeot 106? Please be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 106, see our specific article. However, here are the detailed description to follow in order to do this process correctly:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Peugeot 106. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way

If you wish more tutorials on the Peugeot 106, go to our Peugeot 106 category.