No matter if it’s for your own security, for roadworthiness evaluation or to avoid a fine, making sure your turn signal bulbs are constantly functioning is fundamental. In actual fact, bulbs are wearing parts that will inevitably burn out in the long run and as a result need to be swapped out. You’re probably on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Opel Crossland, we’ve made this content to enable you do it alone without having to go to your auto technician. In a first step, we will check out the checking a burnt-out rear turn signal bulb on your Opel Crossland and in a second step, how to replace the rear turn signal bulb on your Opel Crossland.
How do you know if the rear turn signal bulb on your Opel Crossland is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the opportunity to check all the security features of your Opel Crossland. In actual fact, you are often on the go and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result necessary to take some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Opel Crossland, but you didn’t identify it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Opel Crossland, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Opel Crossland, you will recognise that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Opel Crossland or your position lights on Opel Crossland, don’t hesitate to read our content articles to help you to complete this replacement.
Replacing the rear turn signal bulb on my Opel Crossland
Now let’s go to the most important step of this content, how to replace the rear turn signal bulb on Opel Crossland? Please note that this technique is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Opel Crossland, see our specific content page. However, here are the detailed description to adhere to in order to carry out this act correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Opel Crossland. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working correctly
.
In the event that you have any further questions about the Opel Crossland, do not hesitate to consult our Opel Crossland category.
