Whether for your personal security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are constantly functional is extremely important. In reality, bulbs are wearing parts that will predictably burn out over time and therefore need to be replaced. You’re certainly on this page because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Nissan Pulsar, we’ve written and published this article to enable you do it on your own without having to go to your motor mechanic. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Nissan Pulsar and in a second part, how to replace the rear turn signal bulb on your Nissan Pulsar.
How to find out if the rear turn signal bulb on your Nissan Pulsar is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the occasion to verify all the security features of your Nissan Pulsar. In reality, you are generally in a hurry and are likely to get into your automobile, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact essential to take the time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Nissan Pulsar, but you didn’t perceive it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Nissan Pulsar, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
- By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Nissan Pulsar, you will notice that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Nissan Pulsar or your position lights on Nissan Pulsar, don’t hesitate to have a look at our content articles to help you to do this replacing.
Replacing the rear turn signal bulb on my Nissan Pulsar
Now let’s go to the most instersting part of this content page, how to replace the rear turn signal bulb on Nissan Pulsar? You should be aware that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Nissan Pulsar, see our dedicated article content. Nevertheless, here are the full description to carry out in order to perform this work properly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Nissan Pulsar. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
Whenever you have any additional questions about the Nissan Pulsar, do not hesitate to consult our Nissan Pulsar category.
