No matter if it’s for your own safety, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are all the time functioning is imperative. Indeed, bulbs are wearing parts that will surely burn out with time and as a result need to be swapped out. You’re likely here because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Mitsubishi Outlander, we’ve written and published this content to enable you do it alone without having to go to your motor mechanic. To begin , we will look at examining a burnt-out rear turn signal bulb on your Mitsubishi Outlander and in a second step, how to replace the rear turn signal bulb on your Mitsubishi Outlander.
How do you know if the rear turn signal bulb on your Mitsubishi Outlander is burnt-out or needs to be changed?
When you drive your automobile you don’t all the time have the opportunity to verify all the safety features of your Mitsubishi Outlander. Indeed, you are often on the go and are likely to get into your automobile, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore important to spend some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mitsubishi Outlander, but you didn’t identify it. Here are the two basic techniques to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Mitsubishi Outlander, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Mitsubishi Outlander, you will recognise that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Mitsubishi Outlander or your position lights on Mitsubishi Outlander, don’t hesitate to consult our web content to help you to realize this replacement.
Replacing the rear turn signal bulb on my Mitsubishi Outlander
Now let’s go to the most instersting step of this guideline, how to replace the rear turn signal bulb on Mitsubishi Outlander? Take note that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mitsubishi Outlander, see our specific content. However, here are the detailed steps to stick to to be able to execute this act correctly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Mitsubishi Outlander. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning properly
.
Whenever you have any additional questions about the Mitsubishi Outlander, do not hesitate to consult our Mitsubishi Outlander category.
