No matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, being certain your turn signal bulbs are all the time functional is necessary. In reality, bulbs are wearing devices that will inevitably burn out over time and therefore need to be replaced. You’re most certainly on this page because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Mitsubishi Lancer, we’ve written this content to teach you do it on your own without having to go to your repair shop. In a first step, we will take a look at examining a burnt-out rear turn signal bulb on your Mitsubishi Lancer and in a second part, how to change the rear turn signal bulb on your Mitsubishi Lancer.

change-rear-turn-bulb-mitsubishi-lancer

How to be sure if the rear turn signal bulb on your Mitsubishi Lancer is burnt-out or needs to be changed?

When you drive your automobile you don’t all the time have the opportunity to check all the security features of your Mitsubishi Lancer. In reality, you are often times in a hurry and tend to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take a little time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mitsubishi Lancer, but you didn’t detect it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to change it as soon as possible:

  • When you stop, turn on the ignition on your Mitsubishi Lancer, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
  • By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Mitsubishi Lancer, you will notice that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.

You may have another bulb to change, like the one of your low beam Mitsubishi Lancer or your position lights on Mitsubishi Lancer, don’t hesitate to browse our web content to help you to realize this replacing.

Changing the rear turn signal bulb on my Mitsubishi Lancer

Now let’s go to the most important part of this content, how to change the rear turn signal bulb on Mitsubishi Lancer? Please note that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mitsubishi Lancer, see our specific guideline. On the other hand, here are the detailed description to adhere to to be able to execute this act properly:

  • To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Mitsubishi Lancer. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way

If you want more guides on the Mitsubishi Lancer, go to our Mitsubishi Lancer category.