No matter if it’s for your own safety, for roadworthiness evaluation or to avoid a fine, making sure your turn signal bulbs are always working is very important. In actual fact, bulbs are wearing auto parts that will obviously burn out in the long run and as a result need to be replaced. You’re most likely here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Mini Countryman 2, we’ve created this article to help you do it all on your own without having to go to your mechanic. To begin , we will examine examining a burnt-out rear turn signal bulb on your Mini Countryman 2 and in a second step, how to change the rear turn signal bulb on your Mini Countryman 2.
How to be sure if the rear turn signal bulb on your Mini Countryman 2 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the occasion to check all the safety features of your Mini Countryman 2. In actual fact, you are often on the go and tend to get into your vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result necessary to spend some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mini Countryman 2, but you didn’t notice it. Here are the two simple solutions to check if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Mini Countryman 2, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Mini Countryman 2, you will perceive that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Mini Countryman 2 or your position lights on Mini Countryman 2, don’t hesitate to have a look at our articles to help you to complete this substitution.
Changing the rear turn signal bulb on my Mini Countryman 2
Now let’s go to the most important step of this article, how to change the rear turn signal bulb on Mini Countryman 2? Please be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mini Countryman 2, see our specific guideline. On the other hand, here are the detailed steps to follow to be able to carry out this process accurately:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Mini Countryman 2. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning effectively
.
In the event that you have any further questions about the Mini Countryman 2, do not hesitate to consult our Mini Countryman 2 category.
