Whether for your personal security, for roadworthiness testing or to prevent a fine, ensuring that your turn signal bulbs are all the time working is necessary. In actual fact, bulbs are wearing devices that will inevitably burn out after a while and therefore need to be swapped out. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Mercedes Vito, we’ve written this article to enable you do it on your own without having to go to your motor mechanic. In a first step, we will examine examining a burnt-out rear turn signal bulb on your Mercedes Vito and in a second step, how to replace the rear turn signal bulb on your Mercedes Vito.
How to be sure if the rear turn signal bulb on your Mercedes Vito is burnt-out or needs to be changed?
When you drive your car you don’t all the time have the opportunity to verify all the security features of your Mercedes Vito. In actual fact, you are often times in a hurry and tend to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore essential to take some time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mercedes Vito, but you didn’t notice it. Here are the two basic solutions to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Mercedes Vito, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
- By paying attention to the sound of your turn signals. In truth, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Mercedes Vito, you will perceive that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Mercedes Vito or your position lights on Mercedes Vito, don’t be reluctant to consult our publications to help you to achieve this replacing.
Changing the rear turn signal bulb on my Mercedes Vito
Now let’s go to the most instersting step of this content, how to replace the rear turn signal bulb on Mercedes Vito? Take note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mercedes Vito, see our dedicated article. On the other hand, here are the detailed description to carry out to be able to conduct this process properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Mercedes Vito. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively
.
In the event that you have any further questions about the Mercedes Vito, do not hesitate to consult our Mercedes Vito category.
