No matter if it’s for your personal safety, for roadworthiness evaluation or to avoid a fine, ensuring that your turn signal bulbs are constantly functioning is critical. In actual fact, bulbs are wearing auto parts that will predictably burn out over time and therefore need to be replaced. You’re most likely on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Mercedes Classe Glc, we’ve created this article to help you do it without any help without having to go to your auto technician. In a first step, we will take a look at the checking a burnt-out rear turn signal bulb on your Mercedes Classe Glc and in a second part, how to change the rear turn signal bulb on your Mercedes Classe Glc.
How to be sure if the rear turn signal bulb on your Mercedes Classe Glc is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the opportunity to verify all the safety features of your Mercedes Classe Glc. In actual fact, you are often on the go and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mercedes Classe Glc, but you didn’t identify it. Here are the two basic techniques to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Mercedes Classe Glc, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
- By paying attention to the sound of your turn signals. Indeed, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Mercedes Classe Glc, you will perceive that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Mercedes Classe Glc or your position lights on Mercedes Classe Glc, don’t be reluctant to have a look at our web content to help you to complete this replacing.
Replacing the rear turn signal bulb on my Mercedes Classe Glc
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Mercedes Classe Glc? You should be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mercedes Classe Glc, see our specific content. Nevertheless, here are the full description to carry out to be able to conduct this work accurately:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Mercedes Classe Glc. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating effectively
.
In the event that you have any additional questions about the Mercedes Classe Glc, do not hesitate to consult our Mercedes Classe Glc category.
