Whether for your personal safety, for roadworthiness tests or to avoid a fine, being sure your turn signal bulbs are always functioning is fundamental. In fact, bulbs are wearing parts that will predictably burn out after a while and therefore need to be replaced. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Mercedes Classe C, we’ve made this article to enable you do it without any help without having to go to your auto mechanic. To begin , we will take a look at inspecting a burnt-out rear turn signal bulb on your Mercedes Classe C and in a second step, how to replace the rear turn signal bulb on your Mercedes Classe C.

change-rear-turn-bulb-mercedes-classe-c

How to find out if the rear turn signal bulb on your Mercedes Classe C is burnt-out or needs to be replaced?

When you drive your car you don’t always have the occasion to verify all the safety features of your Mercedes Classe C. In fact, you are often in a hurry and tend to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result crucial to make the effort to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mercedes Classe C, but you didn’t notice it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:

  • When you stop, turn on the ignition on your Mercedes Classe C, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
  • By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Mercedes Classe C, you will perceive that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to replace, like the one of your low beam Mercedes Classe C or your position lights on Mercedes Classe C, don’t be reluctant to browse our web content to help you to realize this replacement.

Replacing the rear turn signal bulb on my Mercedes Classe C

Now let’s go to the most important step of this content, how to replace the rear turn signal bulb on Mercedes Classe C? You should be aware that this procedure is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mercedes Classe C, see our dedicated article content. However, here are the detailed description to stick to in order to do this act accurately:

  • To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Mercedes Classe C. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning effectively

If perhaps you have any further questions about the Mercedes Classe C, do not hesitate to consult our Mercedes Classe C category.