No matter if it’s for your own security, for roadworthiness tests or to avoid a fine, making sure your turn signal bulbs are all the time working is imperative. Obviously, bulbs are wearing parts that will surely burn out as time passes and consequently need to be replaced. You’re probably on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Mercedes Benz CLS Class, we’ve created this article to enable you do it by yourself without having to go to your technician. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Mercedes Benz CLS Class and in a second part, how to change the rear turn signal bulb on your Mercedes Benz CLS Class.
How to be sure if the rear turn signal bulb on your Mercedes Benz CLS Class is burnt-out or needs to be replaced?
When you drive your automobile you don’t all the time have the opportunity to examine all the security features of your Mercedes Benz CLS Class. Obviously, you are often times in a hurry and are likely to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore necessary to take some time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Mercedes Benz CLS Class, but you didn’t identify it. Here are the two ordinary solutions to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Mercedes Benz CLS Class, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By listening to the sound of your turn signals. In truth, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Mercedes Benz CLS Class, you will notice that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Mercedes Benz CLS Class or your position lights on Mercedes Benz CLS Class, don’t hesitate to read our articles to help you to realize this substitution.
Changing the rear turn signal bulb on my Mercedes Benz CLS Class
Now let’s go to the most important part of this article, how to change the rear turn signal bulb on Mercedes Benz CLS Class? Please note that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Mercedes Benz CLS Class, see our specific article. However, here are the detailed steps to stick to in order to carry out this act properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Mercedes Benz CLS Class. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating in the right way
.
If perhaps you have any additional questions about the Mercedes Benz CLS Class, do not hesitate to consult our Mercedes Benz CLS Class category.
