Whether for your own safety, for roadworthiness evaluation or to prevent a fine, ensuring that your turn signal bulbs are always functional is extremely important. In truth, bulbs are wearing devices that will obviously burn out with time and therefore need to be swapped out. You’re most certainly on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Lincoln Navigator, we’ve made this post to teach you do it by yourself without having to go to your motor mechanic. In a first step, we will check out the checking a burnt-out rear turn signal bulb on your Lincoln Navigator and in a second step, how to change the rear turn signal bulb on your Lincoln Navigator.
How to be sure if the rear turn signal bulb on your Lincoln Navigator is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the occasion to examine all the safety features of your Lincoln Navigator. In truth, you are quite often in a hurry and tend to get into your vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact essential to make the effort to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Lincoln Navigator, but you didn’t become aware of it. Here are the two basic ways to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Lincoln Navigator, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Lincoln Navigator, you will detect that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Lincoln Navigator or your position lights on Lincoln Navigator, don’t be reluctant to have a look at our content articles to help you to do this substitution.
Replacing the rear turn signal bulb on my Lincoln Navigator
Now let’s go to the most instersting step of this article, how to change the rear turn signal bulb on Lincoln Navigator? Please note that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Lincoln Navigator, see our specific content. Nevertheless, here are the full description to follow in order to do this work accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Lincoln Navigator. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working correctly
.
Whenever you have any additional questions about the Lincoln Navigator, do not hesitate to consult our Lincoln Navigator category.
