Whether for your own safety, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are constantly working is fundamental. Obviously, bulbs are wearing devices that will predictably burn out in the long run and as a result need to be replaced. You’re certainly on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Lincoln MKZ, we’ve written this post to help you do it by yourself without having to go to your auto mechanic. In a first step, we will have a look at inspecting a burnt-out rear turn signal bulb on your Lincoln MKZ and in a second part, how to change the rear turn signal bulb on your Lincoln MKZ.
How to find out if the rear turn signal bulb on your Lincoln MKZ is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the occasion to verify all the safety features of your Lincoln MKZ. Obviously, you are often on the go and tend to get into your car, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore crucial to take the time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Lincoln MKZ, but you didn’t identify it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Lincoln MKZ, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. Indeed, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Lincoln MKZ, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Lincoln MKZ or your position lights on Lincoln MKZ, don’t be reluctant to consult our publications to help you to complete this replacement.
Replacing the rear turn signal bulb on my Lincoln MKZ
Now let’s go to the most important part of this article content, how to change the rear turn signal bulb on Lincoln MKZ? You should be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Lincoln MKZ, see our specific article. On the other hand, here are the detailed description to follow in order to carry out this act properly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Lincoln MKZ. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating effectively
.
To discover more tips on the Lincoln MKZ, take a look at the Lincoln MKZ category.
