No matter if it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your turn signal bulbs are constantly functional is critical. In reality, bulbs are wearing devices that will surely burn out over time and as a result need to be swapped out. You’re most probably on this page because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Lincoln Continental, we’ve written this post to help you do it without any help without having to go to your auto technician. In a first step, we will check out examining a burnt-out rear turn signal bulb on your Lincoln Continental and in a second part, how to change the rear turn signal bulb on your Lincoln Continental.
How to be sure if the rear turn signal bulb on your Lincoln Continental is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the occasion to verify all the security features of your Lincoln Continental. In reality, you are generally on the go and are likely to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore fundamental to spend some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Lincoln Continental, but you didn’t become aware of it. Here are the two ordinary solutions to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Lincoln Continental, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Lincoln Continental, you will recognize that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Lincoln Continental or your position lights on Lincoln Continental, don’t hesitate to read our articles to help you to realize this replacing.
Changing the rear turn signal bulb on my Lincoln Continental
Now let’s go to the most important part of this article, how to change the rear turn signal bulb on Lincoln Continental? You should be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Lincoln Continental, see our dedicated article content. On the other hand, here are the detailed steps to carry out to be able to perform this process correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Lincoln Continental. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working correctly
.
If perhaps you have any further questions about the Lincoln Continental, do not hesitate to consult our Lincoln Continental category.
