No matter if it’s for your personal safety, for roadworthiness testing or to prevent a fine, ensuring that your turn signal bulbs are all the time functional is very important. Surely, bulbs are wearing parts that will obviously burn out over time and therefore need to be replaced. You’re most probably on this page because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Lexus RX, we’ve written and published this post to help you do it alone without having to go to your technician. In a first step, we will have a look at inspecting a burnt-out rear turn signal bulb on your Lexus RX and in a second part, how to change the rear turn signal bulb on your Lexus RX.
How to be sure if the rear turn signal bulb on your Lexus RX is burnt-out or needs to be replaced?
When you drive your car you don’t all the time have the occasion to verify all the safety features of your Lexus RX. Surely, you are more often than not on the go and are likely to get into your car, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact essential to make the effort to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Lexus RX, but you didn’t perceive it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Lexus RX, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Lexus RX, you will recognize that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Lexus RX or your position lights on Lexus RX, don’t hesitate to browse our web content to help you to complete this replacing.
Replacing the rear turn signal bulb on my Lexus RX
Now let’s go to the most instersting part of this guideline, how to change the rear turn signal bulb on Lexus RX? Take note that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Lexus RX, see our dedicated content. On the other hand, here are the detailed description to follow to be able to complete this act properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Lexus RX. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning in the right way
.
If perhaps you have any further questions about the Lexus RX, do not hesitate to consult our Lexus RX category.
