No matter if it’s for your own security, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are constantly working is fundamental. In actual fact, bulbs are wearing parts that will predictably burn out in the long run and as a result need to be swapped out. You’re most probably here because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Land Rover Discovery, we’ve made this article to help you do it alone without having to go to your motor mechanic. To begin , we will take a look at the checking a burnt-out rear turn signal bulb on your Land Rover Discovery and in a second step, how to replace the rear turn signal bulb on your Land Rover Discovery.

change-rear-turn-bulb-land-rover-discovery

How to be sure if the rear turn signal bulb on your Land Rover Discovery is burnt-out or needs to be changed?

When you drive your automobile you don’t constantly have the possibility to check all the security features of your Land Rover Discovery. In actual fact, you are often on the go and are likely to get into your automobile, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore necessary to spend some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Land Rover Discovery, but you didn’t become aware of it. Here are the two ordinary techniques to check if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Land Rover Discovery, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your turn signals. In truth, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Land Rover Discovery, you will perceive that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to replace, like the one of your low beam Land Rover Discovery or your position lights on Land Rover Discovery, don’t hesitate to have a look at our publications to help you to complete this substitution.

Replacing the rear turn signal bulb on my Land Rover Discovery

Now let’s go to the most important step of this content page, how to replace the rear turn signal bulb on Land Rover Discovery? You should be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Land Rover Discovery, see our dedicated article. Nevertheless, here are the detailed steps to follow in order to do this act properly:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Land Rover Discovery. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning effectively

If you have any further questions about the Land Rover Discovery, do not hesitate to consult our Land Rover Discovery category.