No matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are all the time working is extremely important. In actual fact, bulbs are wearing auto parts that will surely burn out over time and therefore need to be replaced. You’re probably in this article because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Land Rover Defender, we’ve written and published this article to help you do it on your own without having to go to your repair shop. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Land Rover Defender and in a second part, how to change the rear turn signal bulb on your Land Rover Defender.
How do you know if the rear turn signal bulb on your Land Rover Defender is burnt-out or needs to be replaced?
When you drive your car you don’t all the time have the possibility to verify all the security features of your Land Rover Defender. In actual fact, you are generally in a hurry and are likely to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact important to take the time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Land Rover Defender, but you didn’t detect it. Here are the two simple solutions to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Land Rover Defender, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Land Rover Defender, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Land Rover Defender or your position lights on Land Rover Defender, don’t be reluctant to read our content articles to help you to do this replacement.
Changing the rear turn signal bulb on my Land Rover Defender
Now let’s go to the most instersting part of this content page, how to change the rear turn signal bulb on Land Rover Defender? Please note that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Land Rover Defender, see our specific article content. On the other hand, here are the full description to stick to in order to do this work properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Land Rover Defender. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
If you wish more tutorials on the Land Rover Defender, go to our Land Rover Defender category.
