Whether for your own safety, for roadworthiness testing or to prevent a fine, being sure your turn signal bulbs are constantly functional is fundamental. Indeed, bulbs are wearing auto parts that will surely burn out with time and therefore need to be swapped out. You’re certainly here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Kia Sedona, we’ve written this article to help you do it without any help without having to go to your auto mechanic. In a first step, we will look at examining a burnt-out rear turn signal bulb on your Kia Sedona and in a second step, how to replace the rear turn signal bulb on your Kia Sedona.
How to find out if the rear turn signal bulb on your Kia Sedona is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the occasion to verify all the safety features of your Kia Sedona. Indeed, you are quite often in a hurry and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact necessary to spend some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Kia Sedona, but you didn’t become aware of it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Kia Sedona, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Kia Sedona, you will detect that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Kia Sedona or your position lights on Kia Sedona, don’t be reluctant to browse our publications to help you to realize this replacement.
Changing the rear turn signal bulb on my Kia Sedona
Now let’s go to the most important step of this content page, how to replace the rear turn signal bulb on Kia Sedona? Please note that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Kia Sedona, see our dedicated article. Nevertheless, here are the full description to carry out in order to execute this act properly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Kia Sedona. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning in the right way
.
If you want more guides on the Kia Sedona, go to our Kia Sedona category.
