No matter if it’s for your own security, for roadworthiness evaluation or to avoid a fine, being sure your turn signal bulbs are all the time functioning is very important. In truth, bulbs are wearing auto parts that will obviously burn out over time and therefore need to be swapped out. You’re most likely in this article because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Kia Rio 3, we’ve written and published this post to teach you do it by yourself without having to go to your motor mechanic. In a first step, we will look at inspecting a burnt-out rear turn signal bulb on your Kia Rio 3 and in a second part, how to replace the rear turn signal bulb on your Kia Rio 3.

change-rear-turn-bulb-kia-rio-3

How do you know if the rear turn signal bulb on your Kia Rio 3 is burnt-out or needs to be replaced?

When you drive your car you don’t all the time have the occasion to verify all the security features of your Kia Rio 3. In truth, you are generally in a hurry and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result important to take a little time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Kia Rio 3, but you didn’t perceive it. Here are the two ordinary ways to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Kia Rio 3, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
  • By listening to the sound of your turn signals. In truth, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Kia Rio 3, you will perceive that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to replace, like the one of your low beam Kia Rio 3 or your position lights on Kia Rio 3, don’t be reluctant to consult our articles to help you to do this substitution.

Replacing the rear turn signal bulb on my Kia Rio 3

Now let’s go to the most instersting part of this content, how to replace the rear turn signal bulb on Kia Rio 3? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Kia Rio 3, see our dedicated content. On the other hand, here are the full description to carry out to be able to accomplish this act properly:

  • To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Kia Rio 3. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way

If you need more guides on the Kia Rio 3, go to our Kia Rio 3 category.