No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are constantly functioning is imperative. Indeed, bulbs are wearing parts that will predictably burn out after a while and consequently need to be swapped out. You’re most probably on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Jeep Wrangler, we’ve posted this article to teach you do it on your own without having to go to your technician. To begin , we will take a look at inspecting a burnt-out rear turn signal bulb on your Jeep Wrangler and in a second step, how to change the rear turn signal bulb on your Jeep Wrangler.
How to be sure if the rear turn signal bulb on your Jeep Wrangler is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the opportunity to check all the security features of your Jeep Wrangler. Indeed, you are often in a hurry and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is as a result important to take some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Wrangler, but you didn’t identify it. Here are the two simple ways to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Jeep Wrangler, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Jeep Wrangler, you will recognise that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Jeep Wrangler or your position lights on Jeep Wrangler, don’t hesitate to have a look at our articles to help you to complete this replacing.
Replacing the rear turn signal bulb on my Jeep Wrangler
Now let’s go to the most important step of this article, how to change the rear turn signal bulb on Jeep Wrangler? You should be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Wrangler, see our dedicated content. On the other hand, here are the detailed description to carry out in order to complete this process correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Jeep Wrangler. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working effectively
.
If perhaps you have any further questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.
