Whether for your own safety, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are all the time functional is critical. In reality, bulbs are wearing auto parts that will obviously burn out over time and consequently need to be swapped out. You’re most likely here because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Jeep Patriot, we’ve written and published this post to teach you do it by yourself without having to go to your auto technician. To begin , we will take a look at the checking a burnt-out rear turn signal bulb on your Jeep Patriot and in a second step, how to replace the rear turn signal bulb on your Jeep Patriot.

change-rear-turn-bulb-jeep-patriot

How to find out if the rear turn signal bulb on your Jeep Patriot is burnt-out or needs to be replaced?

When you drive your automobile you don’t all the time have the opportunity to examine all the safety features of your Jeep Patriot. In reality, you are often in a hurry and tend to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result important to spend some time to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Patriot, but you didn’t notice it. Here are the two ordinary solutions to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Jeep Patriot, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Jeep Patriot, you will detect that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Jeep Patriot or your position lights on Jeep Patriot, don’t be reluctant to browse our content articles to help you to complete this replacing.

Replacing the rear turn signal bulb on my Jeep Patriot

Now let’s go to the most instersting step of this content, how to replace the rear turn signal bulb on Jeep Patriot? You should be aware that this method is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Patriot, see our specific guideline. However, here are the detailed description to follow to be able to execute this act accurately:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Jeep Patriot. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating properly

Whenever you have any further questions about the Jeep Patriot, do not hesitate to consult our Jeep Patriot category.