Whether for your personal security, for roadworthiness evaluation or to avoid a fine, making sure your turn signal bulbs are always functioning is very important. Indeed, bulbs are wearing devices that will obviously burn out with time and therefore need to be swapped out. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Jeep Grand Cherokee, we’ve written this post to teach you do it without any help without having to go to your motor mechanic. In a first step, we will check out inspecting a burnt-out rear turn signal bulb on your Jeep Grand Cherokee and in a second part, how to change the rear turn signal bulb on your Jeep Grand Cherokee.
How to be sure if the rear turn signal bulb on your Jeep Grand Cherokee is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the occasion to examine all the security features of your Jeep Grand Cherokee. Indeed, you are quite often in a hurry and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore essential to make the effort to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Grand Cherokee, but you didn’t perceive it. Here are the two basic techniques to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Jeep Grand Cherokee, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are working.
- By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Jeep Grand Cherokee, you will perceive that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Jeep Grand Cherokee or your position lights on Jeep Grand Cherokee, don’t be reluctant to read our articles to help you to do this substitution.
Changing the rear turn signal bulb on my Jeep Grand Cherokee
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Jeep Grand Cherokee? Please be aware that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Grand Cherokee, see our specific content. On the other hand, here are the detailed description to carry out to be able to do this act correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Jeep Grand Cherokee. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working effectively
.
If you want more guides on the Jeep Grand Cherokee, go to our Jeep Grand Cherokee category.
