No matter if it’s for your personal security, for roadworthiness evaluation or to prevent a fine, ensuring that your turn signal bulbs are all the time working is critical. Indeed, bulbs are wearing parts that will inevitably burn out with time and consequently need to be replaced. You’re probably in this article because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Jeep Gladiator, we’ve written and published this article to help you do it by yourself without having to go to your mechanic. In a first step, we will take a look at examining a burnt-out rear turn signal bulb on your Jeep Gladiator and in a second step, how to change the rear turn signal bulb on your Jeep Gladiator.

change-rear-turn-bulb-jeep-gladiator

How do you know if the rear turn signal bulb on your Jeep Gladiator is burnt-out or needs to be replaced?

When you drive your automobile you don’t all the time have the occasion to check all the security features of your Jeep Gladiator. Indeed, you are more often than not in a rush and tend to get into your automobile, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact important to make the effort to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Gladiator, but you didn’t detect it. Here are the two simple methods to check if a rear turn signal on your car is out of order or if you need to change it as soon as possible:

  • When you stop, turn on the ignition on your Jeep Gladiator, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Jeep Gladiator, you will realize that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first methodology shown above.

You may have another bulb to change, like the one of your low beam Jeep Gladiator or your position lights on Jeep Gladiator, don’t be reluctant to read our articles to help you to do this replacing.

Replacing the rear turn signal bulb on my Jeep Gladiator

Now let’s go to the most instersting step of this article content, how to change the rear turn signal bulb on Jeep Gladiator? Take note that this method is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Gladiator, see our specific article content. Nevertheless, here are the full description to adhere to in order to execute this act properly:

  • To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Jeep Gladiator. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working correctly

If you wish more tutorials on the Jeep Gladiator, go to our Jeep Gladiator category.