Whether for your own safety, for roadworthiness evaluation or to prevent a fine, being sure your turn signal bulbs are constantly working is imperative. In fact, bulbs are wearing parts that will inevitably burn out in the long run and consequently need to be swapped out. You’re almost certainly on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Jaguar XE, we’ve created this post to teach you do it by yourself without having to go to your auto technician. In a first step, we will check out examining a burnt-out rear turn signal bulb on your Jaguar XE and in a second part, how to replace the rear turn signal bulb on your Jaguar XE.
How to find out if the rear turn signal bulb on your Jaguar XE is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the occasion to check all the safety features of your Jaguar XE. In fact, you are generally on the go and tend to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result important to take a little time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jaguar XE, but you didn’t notice it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Jaguar XE, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Jaguar XE, you will recognize that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Jaguar XE or your position lights on Jaguar XE, don’t be reluctant to browse our web content to help you to achieve this replacement.
Changing the rear turn signal bulb on my Jaguar XE
Now let’s go to the most instersting part of this content, how to replace the rear turn signal bulb on Jaguar XE? Please be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jaguar XE, see our specific article content. On the other hand, here are the detailed description to carry out to be able to perform this work properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Jaguar XE. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating effectively
.
In the event that you have any further questions about the Jaguar XE, do not hesitate to consult our Jaguar XE category.
