No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly functioning is fundamental. Obviously, bulbs are wearing devices that will surely burn out as time passes and as a result need to be swapped out. You’re most likely on this website because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Hyundai Sonata, we’ve put into writing this article to help you do it alone without having to go to your mechanic. To begin , we will check out examining a burnt-out rear turn signal bulb on your Hyundai Sonata and in a second part, how to change the rear turn signal bulb on your Hyundai Sonata.
How to be sure if the rear turn signal bulb on your Hyundai Sonata is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the opportunity to check all the security features of your Hyundai Sonata. Obviously, you are generally on the go and tend to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore necessary to make the effort to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Hyundai Sonata, but you didn’t notice it. Here are the two basic methods to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Hyundai Sonata, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Hyundai Sonata, you will recognize that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Hyundai Sonata or your position lights on Hyundai Sonata, don’t hesitate to consult our content articles to help you to complete this replacing.
Replacing the rear turn signal bulb on my Hyundai Sonata
Now let’s go to the most important part of this article, how to change the rear turn signal bulb on Hyundai Sonata? Please be aware that this procedure is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Hyundai Sonata, see our dedicated content page. On the other hand, here are the detailed steps to follow in order to do this act accurately:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Hyundai Sonata. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating in the right way
.
In the event that you have any further questions about the Hyundai Sonata, do not hesitate to consult our Hyundai Sonata category.
