No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly working is imperative. Indeed, bulbs are wearing auto parts that will surely burn out after a while and therefore need to be swapped out. You’re likely on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you hyundai i10, we’ve put into writing this post to teach you do it by yourself without having to go to your technician. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your hyundai i10 and in a second part, how to change the rear turn signal bulb on your hyundai i10.
How to be sure if the rear turn signal bulb on your hyundai i10 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the possibility to check all the security features of your hyundai i10. Indeed, you are generally in a rush and tend to get into your vehicle, make your trip and put it down straight away without taking the time to do an occasional check-up. It is as a result important to take the time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your hyundai i10, but you didn’t become aware of it. Here are the two basic techniques to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your hyundai i10, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By listening to the sound of your turn signals. In truth, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your hyundai i10, you will realize that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam hyundai i10 or your position lights on hyundai i10, don’t be reluctant to read our articles to help you to do this replacement.
Changing the rear turn signal bulb on my hyundai i10
Now let’s go to the most instersting part of this article content, how to change the rear turn signal bulb on hyundai i10? Please be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your hyundai i10, see our dedicated content page. However, here are the detailed steps to stick to in order to perform this process correctly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your hyundai i10. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working correctly
.
If you wish more tutorials on the hyundai i10, go to our hyundai i10 category.
