Whether for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always working is imperative. In actual fact, bulbs are wearing parts that will inevitably burn out over time and therefore need to be swapped out. You’re likely on this page because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Hyundai Accent, we’ve created this article to help you do it without any help without having to go to your auto technician. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Hyundai Accent and in a second part, how to change the rear turn signal bulb on your Hyundai Accent.

change-rear-turn-bulb-hyundai-accent

How to be sure if the rear turn signal bulb on your Hyundai Accent is burnt-out or needs to be replaced?

When you drive your automobile you don’t always have the possibility to verify all the safety features of your Hyundai Accent. In actual fact, you are more often than not in a hurry and tend to get into your automobile, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore fundamental to spend some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Hyundai Accent, but you didn’t detect it. Here are the two basic solutions to verify if a rear turn signal on your car is out of order or if you need to change it quickly:

  • When you stop, turn on the ignition on your Hyundai Accent, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
  • By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Hyundai Accent, you will notice that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to change, like the one of your low beam Hyundai Accent or your position lights on Hyundai Accent, don’t hesitate to browse our content articles to help you to complete this substitution.

Replacing the rear turn signal bulb on my Hyundai Accent

Now let’s go to the most instersting part of this content, how to change the rear turn signal bulb on Hyundai Accent? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Hyundai Accent, see our specific content. Nevertheless, here are the detailed description to carry out in order to perform this process properly:

  • To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Hyundai Accent. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning in the right way

To get more tips on the Hyundai Accent, take a look at the Hyundai Accent category.