No matter if it’s for your own safety, for roadworthiness evaluation or to avoid a fine, being certain your turn signal bulbs are always functioning is critical. Surely, bulbs are wearing parts that will obviously burn out in the long run and therefore need to be replaced. You’re most likely in this article because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Honda Accord, we’ve written this content to help you do it by yourself without having to go to your technician. To begin , we will look at examining a burnt-out rear turn signal bulb on your Honda Accord and in a second part, how to change the rear turn signal bulb on your Honda Accord.
How to be sure if the rear turn signal bulb on your Honda Accord is burnt-out or needs to be changed?
When you drive your automobile you don’t always have the occasion to verify all the safety features of your Honda Accord. Surely, you are often on the go and are likely to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact essential to take some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Honda Accord, but you didn’t detect it. Here are the two ordinary techniques to verify if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Honda Accord, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Honda Accord, you will perceive that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Honda Accord or your position lights on Honda Accord, don’t be reluctant to have a look at our content articles to help you to do this substitution.
Replacing the rear turn signal bulb on my Honda Accord
Now let’s go to the most instersting part of this article, how to change the rear turn signal bulb on Honda Accord? Take note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Honda Accord, see our specific content page. However, here are the detailed steps to follow to be able to execute this act accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Honda Accord. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively
.
If you want more guides on the Honda Accord, go to our Honda Accord category.
