No matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are constantly working is critical. In truth, bulbs are wearing auto parts that will predictably burn out as time passes and consequently need to be replaced. You’re most certainly here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you GMC Canyon, we’ve put into writing this post to enable you do it on your own without having to go to your auto mechanic. In a first step, we will check out inspecting a burnt-out rear turn signal bulb on your GMC Canyon and in a second step, how to replace the rear turn signal bulb on your GMC Canyon.
How do you know if the rear turn signal bulb on your GMC Canyon is burnt-out or needs to be changed?
When you drive your automobile you don’t constantly have the occasion to examine all the security features of your GMC Canyon. In truth, you are more often than not on the go and are likely to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore fundamental to make the effort to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your GMC Canyon, but you didn’t perceive it. Here are the two ordinary techniques to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your GMC Canyon, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are operational.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your GMC Canyon, you will perceive that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam GMC Canyon or your position lights on GMC Canyon, don’t be reluctant to consult our publications to help you to do this replacing.
Changing the rear turn signal bulb on my GMC Canyon
Now let’s go to the most important step of this article, how to replace the rear turn signal bulb on GMC Canyon? Please be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your GMC Canyon, see our dedicated article. On the other hand, here are the detailed steps to adhere to to be able to carry out this process correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your GMC Canyon. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning effectively
.
If you have any additional questions about the GMC Canyon, do not hesitate to consult our GMC Canyon category.
