No matter if it’s for your personal security, for roadworthiness evaluation or to prevent a fine, being sure your turn signal bulbs are always working is necessary. In truth, bulbs are wearing parts that will obviously burn out over time and therefore need to be replaced. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Ford Ranger, we’ve written and published this post to help you do it on your own without having to go to your repair shop. In a first step, we will look at the checking a burnt-out rear turn signal bulb on your Ford Ranger and in a second step, how to change the rear turn signal bulb on your Ford Ranger.
How do you know if the rear turn signal bulb on your Ford Ranger is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to examine all the security features of your Ford Ranger. In truth, you are more often than not on the go and tend to get into your car, make your journey and put it down straight away without taking the time to do an occasional check-up. It is therefore important to spend some time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Ranger, but you didn’t detect it. Here are the two basic ways to examine if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Ford Ranger, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are working.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Ford Ranger, you will recognise that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Ford Ranger or your position lights on Ford Ranger, don’t be reluctant to have a look at our content articles to help you to complete this replacement.
Changing the rear turn signal bulb on my Ford Ranger
Now let’s go to the most instersting step of this article, how to change the rear turn signal bulb on Ford Ranger? Please note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Ranger, see our specific content. However, here are the detailed steps to carry out to be able to perform this work correctly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ford Ranger. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working effectively
.
If you want more guides on the Ford Ranger, go to our Ford Ranger category.
