Whether for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are constantly working is critical. In reality, bulbs are wearing parts that will surely burn out with time and consequently need to be swapped out. You’re probably on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Ford Mondeo, we’ve written and published this post to teach you do it alone without having to go to your auto mechanic. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Ford Mondeo and in a second part, how to replace the rear turn signal bulb on your Ford Mondeo.
How do you know if the rear turn signal bulb on your Ford Mondeo is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the occasion to check all the safety features of your Ford Mondeo. In reality, you are often in a hurry and are likely to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact crucial to take a little time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Mondeo, but you didn’t perceive it. Here are the two simple methods to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Ford Mondeo, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Ford Mondeo, you will recognize that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Ford Mondeo or your position lights on Ford Mondeo, don’t hesitate to read our content articles to help you to realize this replacing.
Changing the rear turn signal bulb on my Ford Mondeo
Now let’s go to the most important part of this article content, how to replace the rear turn signal bulb on Ford Mondeo? Take note that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Mondeo, see our specific article content. Nevertheless, here are the full description to stick to in order to do this work accurately:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ford Mondeo. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning properly
.
If you have any further questions about the Ford Mondeo, do not hesitate to consult our Ford Mondeo category.
