Whether for your own security, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are always working is imperative. In actual fact, bulbs are wearing auto parts that will surely burn out in the long run and as a result need to be swapped out. You’re most certainly on this website because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Ford Flex, we’ve posted this post to teach you do it without any help without having to go to your motor mechanic. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Ford Flex and in a second part, how to change the rear turn signal bulb on your Ford Flex.
How do you know if the rear turn signal bulb on your Ford Flex is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to examine all the security features of your Ford Flex. In actual fact, you are often on the go and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore necessary to spend some time to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Flex, but you didn’t detect it. Here are the two ordinary methods to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Ford Flex, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Ford Flex, you will perceive that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Ford Flex or your position lights on Ford Flex, don’t hesitate to consult our publications to help you to realize this substitution.
Replacing the rear turn signal bulb on my Ford Flex
Now let’s go to the most important part of this guideline, how to change the rear turn signal bulb on Ford Flex? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Flex, see our specific article content. On the other hand, here are the full description to carry out to be able to carry out this process properly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Ford Flex. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating properly
.
To get more tips on the Ford Flex, take a look at the Ford Flex category.
