Whether for your personal safety, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are constantly functional is very important. Obviously, bulbs are wearing devices that will predictably burn out as time passes and therefore need to be replaced. You’re most probably in this article because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Ford F 250, we’ve written and published this content to enable you do it without any help without having to go to your technician. In a first step, we will take a look at examining a burnt-out rear turn signal bulb on your Ford F 250 and in a second step, how to change the rear turn signal bulb on your Ford F 250.
How do you know if the rear turn signal bulb on your Ford F 250 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the occasion to check all the safety features of your Ford F 250. Obviously, you are more often than not in a hurry and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore necessary to make the effort to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford F 250, but you didn’t become aware of it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Ford F 250, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
- By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Ford F 250, you will notice that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Ford F 250 or your position lights on Ford F 250, don’t be reluctant to have a look at our articles to help you to achieve this replacement.
Changing the rear turn signal bulb on my Ford F 250
Now let’s go to the most important step of this content, how to change the rear turn signal bulb on Ford F 250? Take note that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford F 250, see our specific content. Nevertheless, here are the full description to stick to in order to execute this process properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Ford F 250. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning correctly
To get more tips on the Ford F 250, take a look at the Ford F 250 category.