No matter if it’s for your personal safety, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are all the time working is critical. Surely, bulbs are wearing parts that will surely burn out over time and consequently need to be swapped out. You’re most probably on this page because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Ford Expedition, we’ve posted this content to enable you do it on your own without having to go to your repair shop. To begin , we will take a look at the checking a burnt-out rear turn signal bulb on your Ford Expedition and in a second part, how to change the rear turn signal bulb on your Ford Expedition.
How to be sure if the rear turn signal bulb on your Ford Expedition is burnt-out or needs to be changed?
When you drive your automobile you don’t all the time have the possibility to verify all the safety features of your Ford Expedition. Surely, you are often in a hurry and tend to get into your automobile, make your journey and put it down straight away without taking the time to do an occasional check-up. It is as a result essential to take a little time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Expedition, but you didn’t detect it. Here are the two ordinary techniques to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Ford Expedition, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functional.
- By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Ford Expedition, you will recognize that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Ford Expedition or your position lights on Ford Expedition, don’t hesitate to have a look at our web content to help you to achieve this replacement.
Changing the rear turn signal bulb on my Ford Expedition
Now let’s go to the most instersting part of this content page, how to change the rear turn signal bulb on Ford Expedition? Take note that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Expedition, see our dedicated article. Nevertheless, here are the full description to adhere to to be able to perform this act properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ford Expedition. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating properly
.
To discover more tips on the Ford Expedition, take a look at the Ford Expedition category.
