No matter if it’s for your personal security, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are always functioning is necessary. Surely, bulbs are wearing parts that will surely burn out over time and consequently need to be replaced. You’re certainly on this page because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Ford Edge, we’ve put into writing this article to teach you do it on your own without having to go to your auto technician. In a first step, we will take a look at the checking a burnt-out rear turn signal bulb on your Ford Edge and in a second step, how to replace the rear turn signal bulb on your Ford Edge.
How to find out if the rear turn signal bulb on your Ford Edge is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to verify all the security features of your Ford Edge. Surely, you are quite often on the go and are likely to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take a little time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Edge, but you didn’t perceive it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Ford Edge, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functional.
- By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Ford Edge, you will perceive that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Ford Edge or your position lights on Ford Edge, don’t hesitate to browse our content articles to help you to achieve this substitution.
Changing the rear turn signal bulb on my Ford Edge
Now let’s go to the most instersting step of this article, how to replace the rear turn signal bulb on Ford Edge? Take note that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Edge, see our dedicated guideline. Nevertheless, here are the full description to adhere to to be able to execute this process accurately:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ford Edge. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
Whenever you have any further questions about the Ford Edge, do not hesitate to consult our Ford Edge category.
