Whether for your personal safety, for roadworthiness evaluation or to avoid a fine, ensuring that your turn signal bulbs are always working is imperative. Surely, bulbs are wearing parts that will surely burn out over time and as a result need to be swapped out. You’re probably on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Ford Crown Victoria, we’ve created this article to help you do it by yourself without having to go to your motor mechanic. To begin , we will examine inspecting a burnt-out rear turn signal bulb on your Ford Crown Victoria and in a second step, how to change the rear turn signal bulb on your Ford Crown Victoria.

change-rear-turn-bulb-ford-crown-victoria

How to find out if the rear turn signal bulb on your Ford Crown Victoria is burnt-out or needs to be replaced?

When you drive your vehicle you don’t always have the occasion to check all the safety features of your Ford Crown Victoria. Surely, you are quite often on the go and are likely to get into your vehicle, make your journey and put it down straight away without taking the time to do an occasional check-up. It is as a result important to spend some time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ford Crown Victoria, but you didn’t perceive it. Here are the two simple solutions to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your Ford Crown Victoria, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
  • By listening to the sound of your turn signals. In truth, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Ford Crown Victoria, you will realize that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to change, like the one of your low beam Ford Crown Victoria or your position lights on Ford Crown Victoria, don’t be reluctant to read our content articles to help you to realize this replacement.

Replacing the rear turn signal bulb on my Ford Crown Victoria

Now let’s go to the most important step of this guideline, how to change the rear turn signal bulb on Ford Crown Victoria? You should be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ford Crown Victoria, see our dedicated content page. However, here are the full description to adhere to in order to execute this work correctly:

  • To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Ford Crown Victoria. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning effectively

To get more tips on the Ford Crown Victoria, take a look at the Ford Crown Victoria category.