Whether for your own safety, for roadworthiness evaluation or to avoid a fine, ensuring that your turn signal bulbs are constantly functioning is necessary. Surely, bulbs are wearing parts that will predictably burn out as time passes and as a result need to be swapped out. You’re probably here because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Fiat Panda 3, we’ve posted this article to teach you do it alone without having to go to your repair shop. In a first step, we will have a look at examining a burnt-out rear turn signal bulb on your Fiat Panda 3 and in a second part, how to change the rear turn signal bulb on your Fiat Panda 3.
How to find out if the rear turn signal bulb on your Fiat Panda 3 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the occasion to verify all the safety features of your Fiat Panda 3. Surely, you are more often than not on the go and tend to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result necessary to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Panda 3, but you didn’t notice it. Here are the two ordinary techniques to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Fiat Panda 3, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Fiat Panda 3, you will notice that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Fiat Panda 3 or your position lights on Fiat Panda 3, don’t be reluctant to have a look at our publications to help you to do this replacing.
Changing the rear turn signal bulb on my Fiat Panda 3
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Fiat Panda 3? You should be aware that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Panda 3, see our specific article. However, here are the detailed description to carry out to be able to complete this work accurately:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Fiat Panda 3. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
In the event that you have any additional questions about the Fiat Panda 3, do not hesitate to consult our Fiat Panda 3 category.
